BD Universal Constant Tension Hose Clamps High Torque (2.59in-2.94in)

Spring loaded 300 Series Stainless Steel band clamping force remains consistent through heat cycles

Warranty

Parts
• 12-Months
• 24,000 Miles

GM OEM Coolant Inlet Overflow Hose to Coolant Recovery Tank. Hose Dimensions-1.30 in × 14.00 in × 5.30 in

Genuine GM part is guaranteed by GM's factory warranty!

GM OEM Coolant Return Pipe. Left Side of Engine To Front Of Engine Return Hose. Genuine GM part is guaranteed by GM's factory warranty!

GM Duramax Coolant Hose. Genuine GM part is guaranteed by GM's factory warranty.

GM Duramax Heater Outlet Coolant Pipe. Genuine GM part is guaranteed by GM's factory warranty.

GM OEM EGR Cooler to Heater Core Hose. Genuine GM part is guaranteed by GM's factory warranty!

GM OEM Clamp Lower Reservoir Hose. Genuine GM part is guaranteed by GM's factory warranty.

GM OEM Replacement Lower Radiator Hose Assembly. Genuine GM part is guaranteed by GM's factory warranty!

GM OEM Clamp Air Outlet Tube

Genuine GM part is guaranteed by GM's factory warranty.

GM OEM Lower Coolant Return Hose, Cut to length. Per foot. Genuine GM part is guaranteed by GM's factory warranty!

GM Lower Radiator Hose Retaining Clip. Sold iindividually 2-Required

Genuine GM part is guaranteed by GM's factory warranty.

GM OEM Lower Radiator Hose Retaining Clip.

GM OEM Multi-Use Spring Band Tension Clamp. 17.5mm, Turbo/Air/Vac/Cooling, Transfer Case/ Engine Coolant. Clamp or Clip used in multiple locations and multiple years.

GM OEM Multi-Use Tension Clamp. 13.5mm, Fuel Line Air/Vac/Cooling, Engine Coolant. Clamp or Clip used in multiple locations and multiple years.

GM OEM Passenger Side Lower Radiator Hose.

GM OEM Turbo Coolant Feed Pipe, Genuine GM part is guaranteed by GM's factory warranty!

GM OEM Turbo Coolant Return Hose. This coolant hose goes from the turbo to by-pass pipe.

GM OEM Turbo Coolant Return Pipe, Right Side of Turbo Charger to Engine Front. Genuine GM part is guaranteed by GM's factory warranty!

GM OEM Turbo Upper Coolant Return Hose. Genuine GM part is guaranteed by GM's factory warranty.

GM OEM Water Pump Housing to Oil Cooler Pipe.

GM OEM Replacement Upper Radiator Hose for LBZ and LMM. Genuine GM part is guaranteed by GM's factory warranty!

GM OEM Clamp Reservoir Inlet Hose. Sold Individually 2-Required

Genuine GM part is guaranteed by GM's factory warranty.

LDS T-Bolt Clamps are constructed from rust-proof stainless steel and offer improved durability over traditional worm gear clamps. Everything stays in place because LDS Stainless Steel T-Bolt Clamps are equipped with self-locking nuts.



Features:

Stainless steel construction resists corrosion
Locking nut keeps clamp from loosening
More durable than traditional worm clamps
Polished finish

3.58"-3.85" (98MM-106MM)

LDS T-Bolt Clamps are constructed from rust-proof stainless steel and offer improved durability over traditional worm gear clamps. Everything stays in place because LDS Stainless Steel T-Bolt Clamps are equipped with self-locking nuts.


Features:

Stainless steel construction resists corrosion
Locking nut keeps clamp from loosening
More durable than traditional worm clamps
Polished finish

3.86"-4.17" (104MM-112MM)

LDS T-Bolt Clamps are constructed from rust-proof stainless steel and offer improved durability over traditional worm gear clamps. Everything will stay in place because LDS Stainless Steel T-Bolt Clamps are equipped with self-locking nuts.


Features:

Stainless steel construction resists corrosion
Locking nut keeps clamp from loosening
More durable than traditional worm clamps
Polished finish

2.87"-3.19" (79MM-87MM)

LDS T-Bolt Clamps are constructed from rust-proof stainless steel and offer improved durability over traditional worm gear clamps. Everything stays in place because LDS Stainless Steel T-Bolt Clamps are equipped with self-locking nuts.


Features:

Stainless steel construction resists corrosion
Locking nut keeps clamp from loosening
More durable than traditional worm clamps
Polished finish

2.60"-2.91" (67MM-75MM)

LDS T-Bolt Clamps are constructed from rust-proof stainless steel and offer improved durability over traditional worm gear clamps. Everything stays in place because LDS Stainless Steel T-Bolt Clamps are equipped with self-locking nuts.


Features:

Stainless steel construction resists corrosion
Locking nut keeps clamp from loosening
More durable than traditional worm clamps
Polished finish

3.18"-3.35" (86MM-94MM)

LDS T-Bolt Clamps are constructed from rust-proof stainless steel and offer improved durability over traditional worm gear clamps. Everything stays in place because LDS Stainless Steel T-Bolt Clamps are equipped with self-locking nuts.


Features:

Stainless steel construction resists corrosion
Locking nut keeps clamp from loosening
More durable than traditional worm clamps
Polished finish

2.95"-3.18"

Mishimoto Duracore Transition Boot 3" to 3.5". Mishimoto is proud to release a 3.0" to 3.5" transition silicone boot with DuraCore™ technology. Mishimoto DuraCore™ technology is the synthetic material that comprises the innermost layer of all Mishimoto silicone boots. Compared to normal silicone, DuraCore™ provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of our boots by preventing leaks and blowouts.


Features:

* Manufactured from five layers of silicone with heat-resistant embedded fibers
* DuraCore™ synthetic inner layer provides superior resistance to heat, pressure, fuel, and oil
* Mishimoto Lifetime Warranty

Mishimoto Silicone Hoses, 1.02" Diameter, Red. Mishimoto has developed universal radiator hoses to fit your custom applications. These universal Mishimoto silicone hoses have a 1.02" diameter and are available in Blue.


Features:
* Universal Fitment
* Silicone construction
* 1.02" Diameter
* Mishimoto Lifetime Warranty
* Color Red

High-powered turbocharged vehicles need an air-charge system that can handle the demands of extreme heat and pressure. Failing clamps and blown boots are aggravating problems that can result in the end to a day at the drag strip or a delayed weekend trip. Mishimoto constant tension t-bolt clamps are constructed of 100% stainless steel and provide the reliability and durability you need to keep your vehicle on the road and out of the shop. These clamps are spring loaded to provide strong and consistent holding power. Mishimoto engineered these heavy-duty clamps to compensate for thermal expansion and to provide peace of mind for even the most extreme pressures. The Mishimoto constant tension t-bolt clamps are available in a variety of sizes from 2.5" to 4". These clamps feature an etched M logo and are backed by our Lifetime Warranty

High-powered turbocharged vehicles need an air-charge system that can handle the demands of extreme heat and pressure. Failing clamps and blown boots are aggravating problems that can result in the end to a day at the drag strip or a delayed weekend trip. Mishimoto constant tension t-bolt clamps are constructed of 100% stainless steel and provide the reliability and durability you need to keep your vehicle on the road and out of the shop. These clamps are spring loaded to provide strong and consistent holding power. Mishimoto engineered these heavy-duty clamps to compensate for thermal expansion and to provide peace of mind for even the most extreme pressures. The Mishimoto constant tension t-bolt clamps are available in a variety of sizes from 2.5" to 4". These clamps feature an etched M logo and are backed by our Lifetime Warranty

High-powered turbocharged vehicles need an air-charge system that can handle the demands of extreme heat and pressure. Failing clamps and blown boots are aggravating problems that can result in the end to a day at the drag strip or a delayed weekend trip. Mishimoto constant tension t-bolt clamps are constructed of 100% stainless steel and provide the reliability and durability you need to keep your vehicle on the road and out of the shop. These clamps are spring loaded to provide strong and consistent holding power. Mishimoto engineered these heavy-duty clamps to compensate for thermal expansion and to provide peace of mind for even the most extreme pressures. The Mishimoto constant tension t-bolt clamps are available in a variety of sizes from 2.5" to 4". These clamps feature an etched M logo and are backed by our Lifetime Warranty

High-powered turbocharged vehicles need an air-charge system that can handle the demands of extreme heat and pressure. Failing clamps and blown boots are aggravating problems that can result in the end to a day at the drag strip or a delayed weekend trip. Mishimoto constant tension t-bolt clamps are constructed of 100% stainless steel and provide the reliability and durability you need to keep your vehicle on the road and out of the shop. These clamps are spring loaded to provide strong and consistent holding power. Mishimoto engineered these heavy-duty clamps to compensate for thermal expansion and to provide peace of mind for even the most extreme pressures. The Mishimoto constant tension t-bolt clamps are available in a variety of sizes from 2.5" to 4". These clamps feature an etched M logo and are backed by our Lifetime Warranty

High-powered turbocharged vehicles need an air-charge system that can handle the demands of extreme heat and pressure. Failing clamps and blown boots are aggravating problems that can result in the end to a day at the drag strip or a delayed weekend trip. Mishimoto constant tension t-bolt clamps are constructed of 100% stainless steel and provide the reliability and durability you need to keep your vehicle on the road and out of the shop. These clamps are spring loaded to provide strong and consistent holding power. Mishimoto engineered these heavy-duty clamps to compensate for thermal expansion and to provide peace of mind for even the most extreme pressures. The Mishimoto constant tension t-bolt clamps are available in a variety of sizes from 2.5" to 4". These clamps feature an etched M logo and are backed by our Lifetime Warranty

High-powered turbocharged vehicles need an air-charge system that can handle the demands of extreme heat and pressure. Failing clamps and blown boots are aggravating problems that can result in the end to a day at the drag strip or a delayed weekend trip. Mishimoto constant tension t-bolt clamps are constructed of 100% stainless steel and provide the reliability and durability you need to keep your vehicle on the road and out of the shop. These clamps are spring loaded to provide strong and consistent holding power. Mishimoto engineered these heavy-duty clamps to compensate for thermal expansion and to provide peace of mind for even the most extreme pressures. The Mishimoto constant tension t-bolt clamps are available in a variety of sizes from 2.5" to 4". These clamps feature an etched M logo and are backed by our Lifetime Warranty

Rubber is out, and silicone is in for your Duramax coolant hoses! A leaking coolant hose can lead to serious engine damage if not quickly identified. Upgrade your cooling system with the Mishimoto 6.6L Duramax silicone coolant hose kit for the perfect combination of performance and durability. Mishimoto Duramax coolant hoses are manufactured with high-grade silicone and four layers of heat-resistant embedded fibers to provide increased pressure and temperature tolerance. The Mishimoto Duramax coolant hose kit is ideal for use on both stock and modified trucks for any environment or terrain. This hose kit also has billet CNC'ed quick disconnect ends for a direct OEM fitment with absolutely no cutting required. The Mishimoto 6.6L Duramax silicone coolant hose kit, like all of our Duramax performance parts, includes the Mishimoto Lifetime Warranty.

Features:
* Direct fit for the 2006–2010 Chevrolet/GMC 6.6L Duramax
* Mishimoto Lifetime Warranty
* 6061 aluminum CNC-machined coupler mates lower radiator hose to factory radiator
* Four layers of heat-resistant fibers and silicone
* Max temperature of 330°F
* Efficiently reduces heat
* Increases pressure tolerance
* OEM replacement fit
* T-bolt clamps included for easy install

Includes:
(2) Silicone Hoses
(1) CNC Aluminum Coupler
(2) 2.25" T-bolt Clamps
(2) 2.75" T-bolt Clamps

Rubber is out, and silicone is in for your Duramax coolant hoses! A leaking coolant hose can lead to serious engine damage if not quickly identified. Upgrade your cooling system with the Mishimoto 6.6L Duramax silicone coolant hose kit for the perfect combination of performance and durability. Mishimoto Duramax coolant hoses are manufactured with high-grade silicone and four layers of heat-resistant embedded fibers to provide increased pressure and temperature tolerance. The Mishimoto Duramax coolant hose kit is ideal for use on both stock and modified trucks for any environment or terrain. This hose kit also has billet CNC'ed quick disconnect ends for a direct OEM fitment with absolutely no cutting required. The Mishimoto 6.6L Duramax silicone coolant hose kit, like all of our Duramax performance parts, includes the Mishimoto Lifetime Warranty.

Features:
* Direct fit for the 2006–2010 Chevrolet/GMC 6.6L Duramax
* Mishimoto Lifetime Warranty
* 6061 aluminum CNC-machined coupler mates lower radiator hose to factory radiator
* Four layers of heat-resistant fibers and silicone
* Max temperature of 330°F
* Efficiently reduces heat
* Increases pressure tolerance
* OEM replacement fit
* T-bolt clamps included for easy install

Includes:
(2) Silicone Hoses
(1) CNC Aluminum Coupler
(2) 2.25" T-bolt Clamps
(2) 2.75" T-bolt Clamps

Rubber is out, and silicone is in for your Duramax coolant hoses! A leaking coolant hose can lead to serious engine damage if not quickly identified. Upgrade your cooling system with the Mishimoto 6.6L Duramax silicone coolant hose kit for the perfect combination of performance and durability. Mishimoto Duramax coolant hoses are manufactured with high-grade silicone and four layers of heat-resistant embedded fibers to provide increased pressure and temperature tolerance. The Mishimoto Duramax coolant hose kit is ideal for use on both stock and modified trucks for any environment or terrain. This hose kit also has billet CNC'ed quick disconnect ends for a direct OEM fitment with absolutely no cutting required. The Mishimoto 6.6L Duramax silicone coolant hose kit, like all of our Duramax performance parts, includes the Mishimoto Lifetime Warranty.

Features:
* Direct fit for the 2006–2010 Chevrolet/GMC 6.6L Duramax
* Mishimoto Lifetime Warranty
* 6061 aluminum CNC-machined coupler mates lower radiator hose to factory radiator
* Four layers of heat-resistant fibers and silicone
* Max temperature of 330°F
* Efficiently reduces heat
* Increases pressure tolerance
* OEM replacement fit
* T-bolt clamps included for easy install

Includes:
(2) Silicone Hoses
(1) CNC Aluminum Coupler
(2) 2.25" T-bolt Clamps
(2) 2.75" T-bolt Clamps

PPE Performance Coolant Pipe Kit for Internal Oil Cooler Delete.
Specifically designed for use in conjunction with the PPE Internal Oil Cooler Delete Kit. This custom fabricated kit uses 304 stainless steel, two PPE T-Bolt Clamps and PPE Silicone to secure a perfect fit. Great for marine applications.
To keep your engine cool and improve your vehicle's performance, this product is just the right solution. Manufactured from high-quality materials, it will surely provide excellent performance and years of trouble-free service.
Not compatible with factory oil filter housing.

PPE Silicone Upper and Lower Coolant Hose Kit (Black)(2006-2010)
Factory coolant hose “T” fittings are molded hose or made out of plastic and are prone to cracking at junctions, causing coolant loss. Replace your worn or leaky factory coolant hose system with PPE’s Performance Silicone Coolant Hose Kit.
Perfect for your stock or highly modified Duramax 6.6L diesel truck. Engineered for performance and durability, featuring 4-ply heat-resistant internal fibers that provide strength against high-pressures and temperatures. PPE’s Silicone Coolant Hose Kits incorporate TIG welded, polished 304 stainless steel “T” fitings that eliminate any chance of failures at the “T” junctions. Durable 5 mm thick silicone is twice as thick as the factory hose to ensure long-lasting performance. The quick-connect/disconnect (LBZ, LMM, LML) end is made from billet aluminum and 304 stainless steel. T-Bolt clamps and worm-drive fasteners ensure a tight fit that performs better than factory.
The PPE Performance Silicone Coolant Hose Kit is a direct, bolt-on upgrade that requires no cutting or modifications. Perfect factory fit with better-than-factory performance.
Features:

* Durable, 5 mm thick silicone

* TIG welded, polished 304 stainless steel “T” couplings

* Quick-connect/disconnect billet aluminum end

* 4-ply heat-resistant internal fibers

* Direct bolt-on upgrade

* Includes upper and lower hoses

PPE Silicone Upper and Lower Coolant Hose Kit, Blue (2006-2010)
Factory coolant hose “T” fittings are molded hose or made out of plastic and are prone to cracking at junctions, causing coolant loss. Replace your worn or leaky factory coolant hose system with PPE’s Performance Silicone Coolant Hose Kit.
Perfect for your stock or highly modified Duramax 6.6L diesel truck. Engineered for performance and durability, featuring 4-ply heat-resistant internal fibers that provide strength against high-pressures and temperatures. PPE’s Silicone Coolant Hose Kits incorporate TIG welded, polished 304 stainless steel “T” fitings that eliminate any chance of failures at the “T” junctions. Durable 5 mm thick silicone is twice as thick as the factory hose to ensure long-lasting performance. The quick-connect/disconnect (LBZ, LMM, LML) end is made from billet aluminum and 304 stainless steel. T-Bolt clamps and worm-drive fasteners ensure a tight fit that performs better than factory.
The PPE Performance Silicone Coolant Hose Kit is a direct, bolt-on upgrade that requires no cutting or modifications. Perfect factory fit with better-than-factory performance.
Features:

* Durable, 5 mm thick silicone

* TIG welded, polished 304 stainless steel “T” couplings

* Quick-connect/disconnect billet aluminum end

* 4-ply heat-resistant internal fibers

* Direct bolt-on upgrade

* Includes upper and lower hoses

PPE Silicone Upper and Lower Coolant Hose Kit, Red (2006-2010)
Factory coolant hose “T” fittings are molded hose or made out of plastic and are prone to cracking at junctions, causing coolant loss. Replace your worn or leaky factory coolant hose system with PPE’s Performance Silicone Coolant Hose Kit.
Perfect for your stock or highly modified Duramax 6.6L diesel truck. Engineered for performance and durability, featuring 4-ply heat-resistant internal fibers that provide strength against high-pressures and temperatures. PPE’s Silicone Coolant Hose Kits incorporate TIG welded, polished 304 stainless steel “T” fitings that eliminate any chance of failures at the “T” junctions. Durable 5 mm thick silicone is twice as thick as the factory hose to ensure long-lasting performance. The quick-connect/disconnect (LBZ, LMM, LML) end is made from billet aluminum and 304 stainless steel. T-Bolt clamps and worm-drive fasteners ensure a tight fit that performs better than factory.
The PPE Performance Silicone Coolant Hose Kit is a direct, bolt-on upgrade that requires no cutting or modifications. Perfect factory fit with better-than-factory performance.
Features:

* Durable, 5 mm thick silicone

* TIG welded, polished 304 stainless steel “T” couplings

* Quick-connect/disconnect billet aluminum end

* 4-ply heat-resistant internal fibers

* Direct bolt-on upgrade

* Includes upper and lower hoses

PPE Silicone Upper and Lower Coolant Hose Kit, Yellow (2006-2010)
Factory coolant hose “T” fittings are molded hose or made out of plastic and are prone to cracking at junctions, causing coolant loss. Replace your worn or leaky factory coolant hose system with PPE’s Performance Silicone Coolant Hose Kit.
Perfect for your stock or highly modified Duramax 6.6L diesel truck. Engineered for performance and durability, featuring 4-ply heat-resistant internal fibers that provide strength against high-pressures and temperatures. PPE’s Silicone Coolant Hose Kits incorporate TIG welded, polished 304 stainless steel “T” fitings that eliminate any chance of failures at the “T” junctions. Durable 5 mm thick silicone is twice as thick as the factory hose to ensure long-lasting performance. The quick-connect/disconnect (LBZ, LMM, LML) end is made from billet aluminum and 304 stainless steel. T-Bolt clamps and worm-drive fasteners ensure a tight fit that performs better than factory.
The PPE Performance Silicone Coolant Hose Kit is a direct, bolt-on upgrade that requires no cutting or modifications. Perfect factory fit with better-than-factory performance.
Features:

* Durable, 5 mm thick silicone

* TIG welded, polished 304 stainless steel “T” couplings

* Quick-connect/disconnect billet aluminum end

* 4-ply heat-resistant internal fibers

* Direct bolt-on upgrade

* Includes upper and lower hoses

Aluminum Upper Coolant Pipe for LBZ/LMM Duramax replaces the OEM rubber upper coolant hose and comes powder coated color of choice! NOTE: this pipe does not come standard with a WCFab badge like the other model year coolant pipes.