This is the AirDog II-5G DF-100-5G fuel system for the 2015-2016 Chevy/GMC Duramax 6.6L Diesel. This diesel lift pump mounts to the frame jig in front of the fuel tank for a clean looking installation. The suction side hooks up to the factory suction fitting in the fuel module. The pressure side connects directly to the factory injection pump feed line on the frame. The AirDog Air/Vapor return is sent back to the tank through a filler neck tee. This lift pump system is one of our easiest installations. Our Duramax kits usually see the largest performance gains as these trucks do not come with a lift pump from the factory. This is a 100GPH (Gallon Per Hour) fuel system for stock fuel trucks. Check out our installation manual for a list of parts that are included with this kit.

The AirDog II 5G 100GPH Duramax lift pump will solve the infamous P0087 & P1093 low fuel rail pressure codes by supplying your CP4 injection pump with fuel, rather than your injection pump doing most of the work pulling the fuel up from the tank. This positive supply of purified fuel being fed to your CP4 will also add performance, throttle response, and longevity to your vehicle. Due to extra stress on your fuel system from either high mileage and/or additional performance modifications, like a tuner or larger injectors, your injection pump can become weak over time. This may result in a drop of performance, reliability, and fuel economy. The supplied water separator (WS100) and fuel filter (FF100-2), that mount to the pump, filter your fuel down to a 2 micron rating which surpasses the stock fuel filters filtration capability.

This AirDog II 5G 100GPH Duramax lift pump is recommended for trucks that have a stock to a mildly upgraded fuel system (meaning mild or stock injectors, injection pump, and tuning). See Which Size Do I Need. Backed by a lifetime warranty.

The AirDog® II5G system improves engine performance by:
•Maintaining Correct Injection Timing
•Eliminating Spray Pattern Disruption
•Allowing for a Full Power Stroke and Complete Burn

Benefits of the AirDog® II-5G:
•Increased Fuel Economy
•Increased Power Output
•Increased Torque Output
•Longer Injector Life
•Improved Throttle Response
•Reduced Exhaust Emissions
•Optimized Engine Performance

AirDog® II-5G also overcomes loss of power for diesel engines operating at higher altitudes.

AirDog® II-5G Features
•Dual Feed Gerotor Pump
•Low amperage motor provides efficiency and endurance
•Self-aligning motor requires less maintenance and reduces noise levels
•Intermediate pump shaft seperates motor from fuel
•Small & Compact: ONLY 7L X 10T X 3.2W

AirDog® II-5G Installation Kit

All-Inclusive Installation Kit includes:
•Relay Control Wiring Harness
•Fuel Module Up-Grade (when required)
•All Fuel Fittings Required
•Mounting Hardware
•1/2" Fuel Lines W/ OEM Style Quick Connect Fittings
•AirDog® II-5G Bracket & Spacer
•Plastic Ties
•Installation Manual

AirDog® II-5G Fuel Air Separation System featuring Demand Flow Technology and Enhanced Features

AirDog® II-5G is designed to operate at flows and pressures beyond the maximum requirements of the engine. It receives fuel under vacuum from the fuel tank containing entrained air/vapor, particulate contaminates and unknown quantities of water.

The fuel passes through the water separator which removes the large particulate contaminates that could damage or jam the gear rotor fuel pump. The fuel, with only entrained air/vapor and tiny particulate contaminates remaining enters the fuel pump.

The fuel, now under positive pressure flow, enters the fuel filter. As the fuel passes through the filter media and the remaining particulate contaminates are caught and contained, the entrained air/vapor is also separated. Through the positive fuel air separation features of the patented AirDog® II-4G the separated air/vapor is discharged from the filter and back to the fuel tank through the Primary Air/Vapor Discharge Port.

The fuel passing through the filter media is now free of contaminates and power robbing air/vapor. At pressures and flows able to meet the needs of the engine, it exits the fuel filter through two passageways. First, the fuel for the engine passes into the fuel pickup tube and on to the engine. Then, the excess fuel not needed by the engine recycles internally through the pressure regulator back to the water separator.