Replacement Air Dog Fuel Filter.
•Filters up to 10 microns
•Fits AirDog 1 and AirDog 2
•Typical service interval 10-15K Miles
•Full manufacturer's warranty

Replacement Air Dog Fuel Filter.
•Filters up to 2 microns
•Fits AirDog 1 and AirDog 2
•Typical service interval 10-15K Miles
•Full manufacturer's warranty

Replacement Water Separator Details:
•Direct factory replacement
•Fits AirDog 1 and AirDog 2
•Full manufacturer's warranty

The Donaldson Fuel Filter/Water Separator at 3 Micron is 99% efficient. Flows at 90GPH and is compact (7.61")
This Donaldson fuel filter is a 3 micron fuel & water separator filter combo. It also features a built in water drain on the bottom of the filter.
When using with a CAT Adapter the adapter O-ring has to be removed and replaced with the Donaldson O-ring provided with filter.
Filter also

Donaldson fuel filters help keep your engines and equipment running smoothly. Today‘s diesel engines need to maintain high performance levels to remain compliant with stringent emissions regulations. Fuel filtration plays a key role, with current high pressure common rail fuel injectors operating at pressures up to 2,000 - 3,100 bar / 30,000 - 45,000 psi. Clean fuel helps minimize expensive repairs and unplanned downtime. We offer fuel filtration products to protect your fuel systems – including injectors, pumps and engines.

Donaldson’s third generation of Synteq fuel filter water separator media uses both cellulose and meltblown synthetic layers to achieve the highest levels of fuel filtration performance. This double-layered media increases particulate holding capacity and is a high performance water separator. It has the ability for high efficiency emulsified water separation and can be used in both suction and pressure sides of fuel systems. The polyester layer improves water separation and dirt holding capacity performance. This media is ideal for critical applications or extended service intervals.

Attributes:
Efficiency: 99% 3 micron
Outer Diameter: 3.66 inch (93 mm)
Thread Size: 1-14 UN
Length: 7.61 inch (193.3 mm)
Gasket OD: 2.83 inch (72 mm)
Gasket ID: 2.44 inch (62 mm)

*This filter can only be used with adapter unit* (Adapter May be purchased separately)

Fleece Dodge Cummins Auxiliary Fuel Filter and Line Kit. Auxiliary fuel filter and line kit for your 2003-2018 Dodge Cummins. The kit includes everything you need to properly route, plumb and filter fuel for your Cummins engine from the lift pump to the injection pump.
A Fleece Performance fuel filter delete kit is required for use with this product.

Kit includes:
Donaldson 3 micron fuel filter and water separator (Donaldson P/N P553207)
Filter base with integral mounting
Distribution filter block / filter coupler
Push Lock hose and all necessary AN and barb fittings
CP3 Feed fittings for 5.9L and 6.7L