LDS T-Bolt Clamps are constructed from rust-proof stainless steel and offer improved durability over traditional worm gear clamps. Everything stays in place because LDS Stainless Steel T-Bolt Clamps are equipped with self-locking nuts.



Features:

Stainless steel construction resists corrosion
Locking nut keeps clamp from loosening
More durable than traditional worm clamps
Polished finish

3.58"-3.85" (98MM-106MM)

LDS T-Bolt Clamps are constructed from rust-proof stainless steel and offer improved durability over traditional worm gear clamps. Everything stays in place because LDS Stainless Steel T-Bolt Clamps are equipped with self-locking nuts.


Features:

Stainless steel construction resists corrosion
Locking nut keeps clamp from loosening
More durable than traditional worm clamps
Polished finish

3.86"-4.17" (104MM-112MM)

LDS Silicone Boot 2 3/8" x 3"x 4.5"Long. High temperature heat resistant silicone provides superior protection from heat and high pressure.

LDS T-Bolt Clamps are constructed from rust-proof stainless steel and offer improved durability over traditional worm gear clamps. Everything will stay in place because LDS Stainless Steel T-Bolt Clamps are equipped with self-locking nuts.


Features:

Stainless steel construction resists corrosion
Locking nut keeps clamp from loosening
More durable than traditional worm clamps
Polished finish

2.87"-3.19" (79MM-87MM)

LDS Silicone Boot 3" Straight 4" long. High temperature heat resistant silicone provides superior protection from heat and high pressure.

LDS T-Bolt Clamps are constructed from rust-proof stainless steel and offer improved durability over traditional worm gear clamps. Everything stays in place because LDS Stainless Steel T-Bolt Clamps are equipped with self-locking nuts.


Features:

Stainless steel construction resists corrosion
Locking nut keeps clamp from loosening
More durable than traditional worm clamps
Polished finish

3.18"-3.35" (86MM-94MM)

LDS T-Bolt Clamps are constructed from rust-proof stainless steel and offer improved durability over traditional worm gear clamps. Everything stays in place because LDS Stainless Steel T-Bolt Clamps are equipped with self-locking nuts.


Features:

Stainless steel construction resists corrosion
Locking nut keeps clamp from loosening
More durable than traditional worm clamps
Polished finish

2.95"-3.18"

LDS Silicone Boot 4" Straight 3" long. High temperature heat resistant silicone provides superior protection from heat and high pressure.

LDS T-Bolt Clamps are constructed from rust-proof stainless steel and offer improved durability over traditional worm gear clamps. Everything stays in place because LDS Stainless Steel T-Bolt Clamps are equipped with self-locking nuts.


Features:

Stainless steel construction resists corrosion
Locking nut keeps clamp from loosening
More durable than traditional worm clamps
Polished finish

2.60"-2.91" (67MM-75MM)

BD Universal Constant Tension Hose Clamps High Torque (2.59in-2.94in)

Spring loaded 300 Series Stainless Steel band clamping force remains consistent through heat cycles

Warranty

Parts
• 12-Months
• 24,000 Miles

BD Power Drivers Side Intercooler Hose & Clamp Kit (Drivers Side)

Each Hose is designed to meet 3x their working pressure
• Utilizing 4, 5 plies of DuPont Nomex / Aramid fiber (no inferior Polyester is used)
• Higher pressure applications have a Red Iron Oxide internal color
• Flurosilicone elastomers and Fluorocarbon withstands oily residues
• Spring loaded 300 Series Stainless Steel band clamping force remains consistent through heat cycles
• Many specific kits for specific vehicles, turbochargers and intercoolers

Warranty

Parts
• 12-Months
• 24,000 Miles

The BD-Power 1045201 Boot Lock Kit holds your boots in place! Includes aluminum and steel threaded stand-offs to weld onto turbo, intercooler & pipes along with brackets to secure the pipes & hoses in place. Swivel design with 15º articulation compensates for difference in pipe sizes and quick disconnect allows for ease of changing intake components. Turnbuckle with 1.50" of travel provides ease of adjustment. Don't blow your boots, engine or turbo and ruin your day.

Features:
•Quick Disconnect, Swivel Design
•Keeps Connections Secure Under High Boost
•Fabrication Required For Installation

Spring loaded 300 Series Stainless Steel band clamping force remains consistent through heat cycles
Sold Individually
Warranty
Parts
• 12-Months
• 24,000 Miles

Spring loaded 300 Series Stainless Steel band clamping force remains consistent through heat cycles
Sold Individually
Warranty
Parts
• 12-Months
• 24,000 Miles

Spring loaded 300 Series Stainless Steel band clamping force remains consistent through heat cycles

Sold Individually
Warranty
Parts
• 12-Months
• 24,000 Miles

Spring loaded 300 Series Stainless Steel band clamping force remains consistent through heat cycles
Sold Individually
Warranty
Parts
• 12-Months
• 24,000 Miles

GM OEM Connector Upper Tube Clamp. Sold individually, 2-Required

GM OEM Connector Tube Clamp Lower. Sold Individually, 2--Required

GM Lower Intercooler Silicone Boot (Hot Side)OEM Replacement, Clamps sold separately.

GM OEM Hot Side Intercooler Pipe

GM OEM Intercooler Hose (Outlet Duct)

GM T-Bolt Clamp - T-Bolt,3.13-3.44" Dia, 0.75" Stainless Steel

GM OEM Turbo Charger Intercooler-Outlet Duct Seal. Sold Individually 2-Required

GM OEM Upper Inter Cooler Inlet Hose (2009-2010)(2015-2016)

GM OEM Retaining Ring Cold Side Intercooler Pipe

GM Turbo Duct Connector Boot.

Mishimoto Duracore Transition Boot 3" to 3.5". Mishimoto is proud to release a 3.0" to 3.5" transition silicone boot with DuraCore™ technology. Mishimoto DuraCore™ technology is the synthetic material that comprises the innermost layer of all Mishimoto silicone boots. Compared to normal silicone, DuraCore™ provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of our boots by preventing leaks and blowouts.


Features:

* Manufactured from five layers of silicone with heat-resistant embedded fibers
* DuraCore™ synthetic inner layer provides superior resistance to heat, pressure, fuel, and oil
* Mishimoto Lifetime Warranty

Mishimoto Duramax Boot Kit (2006-2010)Mishimoto is proud to expand their line of Duramax performance parts to include a direct-fit silicone boot kit with DuraCore™ technology designed specifically for the 6.6L Chevrolet/GMC Duramax. Mishimoto DuraCore™ technology is the synthetic material that comprises the innermost layer of all Mishimoto silicone diesel boots. Compared to normal silicone, DuraCore™ provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of our boots by preventing leaks and blowouts. To add even more reliability this kit includes Mishimoto constant-tension T-bolt clamps for accurate and consistent holding power. As with all our Duramax performance parts, this boot kit is protected by the Mishimoto Lifetime Warranty.

Features:
*Direct fit for the 2006–2010 Chrevrolet/GMC 6.6L Duramax
* Five layers of 100% silicone for maximum durability and blowout prevention
* DuraCore™ technology provides superior resistance to heat, pressure, fuel, and oil
*Includes Mishimoto Constant-Tension T-bolt Clamps

Mishimoto Duramax Hot Side Pipe and Boot Kit
Mishimoto is proud to expand their line of Duramax performance parts to include a 6.6L Duramax Intercooler Pipe and Boot Kit. Improve the power and efficiency of your Duramax with the Mishimoto hot-side intercooler pipe and boot kit. The factory hot-side pipe for the 2004.5-2010 Duramax features numerous restrictive bends and chokes the engine with 2.5" piping. The 3" diameter of the Mishimoto intercooler pipe provides a significant increase in airflow that results in more power and lower EGTs. The Mishimoto hot-side intercooler pipe and boot kit is a direct bolt-on upgrade and features mandrel bent aluminum with a polished finish. Mishimoto intercooler piping kits feature our silicone boots with DuraCore™ technology. Mishimoto DuraCore™ technology is the synthetic material that comprises the innermost layer of all Mishimoto silicone diesel boots.¾ Compared to normal silicone, DuraCore™ provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of our boots by preventing leaks and blowouts. To add even more reliability this kit includes Mishimoto constant-tension T-bolt clamps for accurate and consistent holding power. This hot-side pipe is the perfect addition to the Mishimoto 6.6L Duramax performance intercooler. The Mishimoto hot-side intercooler pipe and boot kit is made in the USA and like all of our Duramax performance parts, this Duramax kit comes with the Mishimoto Lifetime Warranty.

Features:
* Direct fit for the 2004.5–2010 Chrevrolet/GMC 6.6L Duramax
* Includes hot side pipes and boots
* Mandrel-bent aluminum polished pipes eliminate restrictive bends
* Provides improvement in airflow
* Includes Mishimoto Silicone Boots with DuraCore™ technology
* Includes Mishimoto Constant Tension
* Mishimoto Lifetime Warranty

Mishimoto GM/Duramax 6.6L Factory Fit Boot Kit (2006-2010)
Mishimoto is proud to expand their line of Duramax performance parts to include a direct-fit silicone boot kit with DuraCore(TM) technology designed specifically for the 6.6L Chevrolet/GMC Duramax. Mishimoto DuraCore(TM) technology is the synthetic material that comprises the innermost layer of all Mishimoto silicone diesel boots. Compared to normal silicone, DuraCore(TM) provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of our boots by preventing leaks and blowouts. To add even more reliability, this kit includes Mishimoto Constant Tension T-bolt Clamps for accurate and consistent holding power. As with all our Duramax performance parts, this boot kit is protected by the Mishimoto Lifetime Warranty


Fits:

Direct fit for the 2006-2010 Chrevrolet/GMC 6.6L Duramax
Five layers of 100% silicone for maximum durability and blowout prevention
DuraCore(TM) technology provides superior resistance to heat, pressure, fuel, and oil
Includes Mishimoto Constant Tension T-bolt Clamps
Mishimoto Lifetime Warranty

Mishimoto is proud to expand their line of Duramax performance parts to include a 6.6L Duramax Intercooler Pipe and Boot Kit. Improve the power and efficiency of your Duramax with the Mishimoto hot-side intercooler pipe and boot kit. The factory hot-side pipe for the 2004.5-2010 Duramax features numerous restrictive bends and chokes the engine with 2.5" piping. The 3" diameter of the Mishimoto intercooler pipe provides a significant increase in airflow that results in more power and lower EGTs. The Mishimoto hot-side intercooler pipe and boot kit is a direct bolt-on upgrade and features mandrel bent aluminum with a polished finish. Mishimoto intercooler piping kits feature our silicone boots with DuraCore™ technology. Mishimoto DuraCore™ technology is the synthetic material that comprises the innermost layer of all Mishimoto silicone diesel boots.¾ Compared to normal silicone, DuraCore™ provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of our boots by preventing leaks and blowouts. To add even more reliability this kit includes Mishimoto constant-tension T-bolt clamps for accurate and consistent holding power. This hot-side pipe is the perfect addition to the Mishimoto 6.6L Duramax performance intercooler. The Mishimoto hot-side intercooler pipe and boot kit is made in the USA and like all of our Duramax performance parts, this Duramax kit comes with the Mishimoto Lifetime Warranty.

Features:
* Direct fit for the 2004.5–2010 Chrevrolet/GMC 6.6L Duramax
* Includes hot side pipes and boots
* Mandrel-bent aluminum polished pipes eliminate restrictive bends
* Provides improvement in airflow
* Includes Mishimoto Silicone Boots with DuraCore™ technology and Mishimoto Constant- *Tension T-bolt Clamps
*Mishimoto Lifetime Warranty


Installation Torque Specs:
27in-lbs(3N*M)is recommended for all t-bolt and constant tension t-bolt clamps.
These clamps have an operating range of 18-35in-lbs (2-4N*M).
Do not exceed the maximum torque rating of 35 in-lbs (4N*M).



Purchase Includes (1) Aluminum Intercooler Pipe
(2) Silicone Boots with DuraCore™ Technology
(4) Constant Tension T-Bolt Clamps
(2) Aluminum Mishimoto M Logo Badges
Mishimoto Lifetime Warranty

Mishimoto is expanding their line of Duramax performance parts! Mishimoto has developed a cold-side intercooler pipe and boot kit for the 2006-2010 6.6L Duramax. The factory pipe and boot do not stand a chance against the heat and pressure of your high-powered Duramax; upgrade to the Mishimoto kit for increased reliability, durability, and performance. The Mishimoto cold-side pipe is constructed of mandrel bent aluminum with a polished finish. This cold-side pipe eliminates restrictive bends in the factory pipe, allowing for improvements in airflow, power, and EGTs. This Duramax performance parts kit includes Mishimoto silicone boots with DuraCore™ technology.

Mishimoto DuraCore™ technology is the synthetic material that comprises the innermost layer of all Mishimoto silicone diesel boots.¾ Compared to normal silicone, DuraCore™ provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of our boots by preventing leaks and blowouts. To add even more reliability this kit includes Mishimoto constant-tension T-bolt clamps for accurate and consistent holding power. The cold-side pipe and boot kit is the perfect addition to the Mishimoto 6.6L Duramax performance intercooler. This kit is made in the USA and like all of our Duramax performance parts, comes with the Mishimoto Lifetime Warranty.

High-powered turbocharged vehicles need an air-charge system that can handle the demands of extreme heat and pressure. Failing clamps and blown boots are aggravating problems that can result in the end to a day at the drag strip or a delayed weekend trip. Mishimoto constant tension t-bolt clamps are constructed of 100% stainless steel and provide the reliability and durability you need to keep your vehicle on the road and out of the shop. These clamps are spring loaded to provide strong and consistent holding power. Mishimoto engineered these heavy-duty clamps to compensate for thermal expansion and to provide peace of mind for even the most extreme pressures. The Mishimoto constant tension t-bolt clamps are available in a variety of sizes from 2.5" to 4". These clamps feature an etched M logo and are backed by our Lifetime Warranty

High-powered turbocharged vehicles need an air-charge system that can handle the demands of extreme heat and pressure. Failing clamps and blown boots are aggravating problems that can result in the end to a day at the drag strip or a delayed weekend trip. Mishimoto constant tension t-bolt clamps are constructed of 100% stainless steel and provide the reliability and durability you need to keep your vehicle on the road and out of the shop. These clamps are spring loaded to provide strong and consistent holding power. Mishimoto engineered these heavy-duty clamps to compensate for thermal expansion and to provide peace of mind for even the most extreme pressures. The Mishimoto constant tension t-bolt clamps are available in a variety of sizes from 2.5" to 4". These clamps feature an etched M logo and are backed by our Lifetime Warranty

High-powered turbocharged vehicles need an air-charge system that can handle the demands of extreme heat and pressure. Failing clamps and blown boots are aggravating problems that can result in the end to a day at the drag strip or a delayed weekend trip. Mishimoto constant tension t-bolt clamps are constructed of 100% stainless steel and provide the reliability and durability you need to keep your vehicle on the road and out of the shop. These clamps are spring loaded to provide strong and consistent holding power. Mishimoto engineered these heavy-duty clamps to compensate for thermal expansion and to provide peace of mind for even the most extreme pressures. The Mishimoto constant tension t-bolt clamps are available in a variety of sizes from 2.5" to 4". These clamps feature an etched M logo and are backed by our Lifetime Warranty

High-powered turbocharged vehicles need an air-charge system that can handle the demands of extreme heat and pressure. Failing clamps and blown boots are aggravating problems that can result in the end to a day at the drag strip or a delayed weekend trip. Mishimoto constant tension t-bolt clamps are constructed of 100% stainless steel and provide the reliability and durability you need to keep your vehicle on the road and out of the shop. These clamps are spring loaded to provide strong and consistent holding power. Mishimoto engineered these heavy-duty clamps to compensate for thermal expansion and to provide peace of mind for even the most extreme pressures. The Mishimoto constant tension t-bolt clamps are available in a variety of sizes from 2.5" to 4". These clamps feature an etched M logo and are backed by our Lifetime Warranty

High-powered turbocharged vehicles need an air-charge system that can handle the demands of extreme heat and pressure. Failing clamps and blown boots are aggravating problems that can result in the end to a day at the drag strip or a delayed weekend trip. Mishimoto constant tension t-bolt clamps are constructed of 100% stainless steel and provide the reliability and durability you need to keep your vehicle on the road and out of the shop. These clamps are spring loaded to provide strong and consistent holding power. Mishimoto engineered these heavy-duty clamps to compensate for thermal expansion and to provide peace of mind for even the most extreme pressures. The Mishimoto constant tension t-bolt clamps are available in a variety of sizes from 2.5" to 4". These clamps feature an etched M logo and are backed by our Lifetime Warranty

High-powered turbocharged vehicles need an air-charge system that can handle the demands of extreme heat and pressure. Failing clamps and blown boots are aggravating problems that can result in the end to a day at the drag strip or a delayed weekend trip. Mishimoto constant tension t-bolt clamps are constructed of 100% stainless steel and provide the reliability and durability you need to keep your vehicle on the road and out of the shop. These clamps are spring loaded to provide strong and consistent holding power. Mishimoto engineered these heavy-duty clamps to compensate for thermal expansion and to provide peace of mind for even the most extreme pressures. The Mishimoto constant tension t-bolt clamps are available in a variety of sizes from 2.5" to 4". These clamps feature an etched M logo and are backed by our Lifetime Warranty

High-powered turbocharged vehicles need an air-charge system that can handle the demands of extreme heat and pressure. Failing clamps and blown boots are aggravating problems that can result in the end to a day at the drag strip or a delayed weekend trip. Mishimoto constant tension t-bolt clamps are constructed of 100% stainless steel and provide the reliability and durability you need to keep your vehicle on the road and out of the shop. These clamps are spring loaded to provide strong and consistent holding power. Mishimoto engineered these heavy-duty clamps to compensate for thermal expansion and to provide peace of mind for even the most extreme pressures. The Mishimoto constant tension t-bolt clamps are available in a variety of sizes from 2.5" to 4". These clamps feature an etched M logo and are backed by our Lifetime Warranty

T-bolt clamp for 2 3/4" Silicone Boots.

WCFab Heavy Duty 2 3/4" x 3" Silicone Boot 4.5" Long with steel enforced liner. Used for Duramax Factory Turbo compressor outlets.

WCFab Heavy Duty 2 3/8" x 3" Silicone Boot 4.5" Long with steel enforced liner. Used for Duramax Factory Turbo compressor outlets.

WCFab Heavy Duty 3" Silicone Boot, 4" Long used for 3" Intercooler Piping

T-bolt clamp for 3" Silicone Boots.

T-bolt clamp for 3 1/2" Silicone Boots.

WCFab Heavy Duty 4" Silicone Boot, 3" Long used for 4" Intercooler Piping and Intakes.

T-bolt clamp for 4" Silicone Boots.

5 1/2 X 5" Silicone Reducing Boot for race cover turbo inlets.

T-bolt clamp for 5 1/2" Silicone Boots.

WCFab Heavy Duty 5" Silicone Boot, 2 1/2" Long used for 5" Intakes/Turbo Inlets.

T-bolt clamp for 5" Silicone Boots.

Replacement V-band clamp for WCFAB Kits with an S400 compressor cover v-band outlet connection. S400 Single turbo kits, S400 Twin Turbo Kits.